Pipe Marking System (Type-Ⅱ)
Pipe Marking System (Type-Ⅱ)
This system is installed above the pipe longitudinal transfer conveyor and performs paint marking characters, symbols and special marks at the designated position of the pipe outside surface, while the pipe is being longitudinally transferred on the conveyor, in accordance with the data received from host computer.
Features
- Fully automatic marking in accordance with the marking data from host computer
- Fast marking cycle and high productivity because of the marking during the pipe is running on the conveyor
- Fast response pencil guns spray clear, sharp and uniform dot marking
- Numerals, Alphabets, Symbols and special marks can be marked on full length of pipe
- Multi-line marking and parallel marking of several pipes can be done if multiple marking machines are installed
Main Specification
Main Equipment
Main Specification
| Pipe to be marked | Seamless pipe, ERW pipe |
|---|---|
| Outer Diameter | More than 27.0 mm |
| Pipe Condition | Dry, free of water, oil and mill scale Temperature : Normal temperature Bend : Less than 4/1000 mm for total length |
| Installed Position | Before cutting: Above the V-roller transfer conveyor After cutting: Above the chain transfer conveyor (Recommendation) |
| Marking Specification | Marking Type : Paint dot spray type Color : White Dot Configuration : 22-dot-matrix Dot Diameter, Pitch : 2.2 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks |
| Marking Speed | Max. 90 m/min. (Max. 45 m/min. in case of high-density marking) |
| Paint/Remover | Paint : Ecocolor PSG (White) Remover : Ecocolor Remover G |
Main Equipment
| Mechanical Equipment | Marking Machine : Marking Head (22 dots), Marking Head Case, Nozzle Cleaning Device and others Approx. 300 W x 350 H x 350 L mm |
|---|---|
| Pump Unit : Paint Pump, Remover Pump each 1 set Approx. 860 W x 1160 H x 800 D mm | |
| Frame and Drive Unit : Cantilever type frame Drive unit for Marking Machine: Z-axis Upward and Downward movement Speed : 280 mm/sec. | |
| Control Equipment | Control Panel, Power Distribution Panel, Driver Panel, Main Operation Panel, Local Operation Panel 1 set each |
Typical Marking Pattern
1. Single end marking
2. Double end marking
3. Repeat marking
Marking Sample
Marking Sample 1