Heavy Plate Marking System (Type-Ⅱ)

Heavy Plate Marking System (Type-Ⅱ)

This system is installed above the plate roller transfer table and marks characters, symbols and special marks at the designated position of surface of the plate, while the plate is being transferred on the roller table, in accordance with the marking data received from host computer.

Features

  • Fully automatic marking in accordance with the marking data from host computer
  • Fast response pencil guns spray clear, sharp and uniform dot marking at the plate transfer speed of 120 m/min.
  • 36-dot-matrix dense special marks and fonts can be registered max. 999 kinds
  • Fast marking cycle/High productivity because of the marking during the plate is running
Main Specification
Plate to be markedHeavy Plate
Plate ConditionDry, free of water, oil and mill scale
Temperature : Max. 300 degrees C
Waviness : minus 5-plus 50mm/m
Top/Tail edge curve : Max. plus/minus 100 mm
Installed PositionAbove the plate roller transfer table in Plate finishing plant
Line speed : Max. 120 m/min
Marking SpecificationMarking Type : Paint dot spray type
Color : White
Dot Configuration : 36 dots/head x 4 heads x 2 sets
Dot Diameter, Pitch : 5 mm
Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks
Paint/RemoverPaint : Tecmarker PMK (White)
Remover : Tecmarker Remover PMK
Main Equipment
Marking MachineMarking Head (36-dot x 4), Marking Head Case, Nozzle Cleaning Device and others
Approx. 400 W x 350 H x1200 L mm x 2 sets
Pump UnitPaint Unit : Approx. 860W x 1160H x 530D mm x 2 sets
Remover Unit : ditto
Marking Control PanelPrint Controller (PC), Sequencer (PLC)
Approx. 1600 W x 2000 H x 600 D mm
Marking Driver PanelApprox. 1600 W x 2000 H x 600 D mm x 2 sets
Servo Driver PanelApprox. 1200 W x 2000 H x 600 D mm
Main Operation PanelDesk type Approx. 1200 W x 850 D x 800 H mm
Frame and Drive UnitBridge type frame
Drive unit for Marking Machine:
X-axis Transverse movement
Z-axis Upward and Downward movement